What to do With Unsteady Idling After Refitting a Natural Gas Vehicle?

Unsteady idling, weak acceleration, and stalling when the vehicle is changed from oil to gas are common problems. It boils down to the following reasons:

1. Starting from the principle of car oil-to-gas conversion, because the explosion point of gasoline and LPG or natural gas is quite different, that is to say, car oil-to-gas is designed according to the explosion point of gasoline, and its temperature is lower than liquefied petroleum gas and natural gas. Therefore, when using gasoline, sometimes the problem does not show up, but it can be obvious when using liquefied petroleum gas or natural gas.

2. The automobile oil change to gas idling is not stable. Judging from the faults of automobile components, there are several reasons:

1) The valve is dirty, clean the valve.

2) If the spark plug is defective, replace the spark plug.

3. Unstable idling speed after changing automobile oil to gas From the perspective of automobile oil to the gas device, it may be the quality problem of the electronic control system or pressure reducer and injection rail.

4. Idle speed instability after changing the oil to gas. From the perspective of modification technology, it may be caused by too large or too small jet holes in the injection rail, and inaccurate timing and quantity of injection controlled by the electronic control system and pressure reducer. This needs to be adjusted by an experienced teacher.

As a professional manufacturer of CNG conversion kits, Jiaxing Lineng Autogas Equipment Co., Ltd. produces CNG injection kits and other ancillary products for natural gas vehicles. Please continue to pay attention to us for more details.